STEERING RACK RIGID BUSH KIT

STEERING RACK RIGID BUSH KIT

STEERING RACK RIGID BUSH KIT

Product No. 53685-FD2-000-A

Availability:

Excl. Tax: €125.00 Incl. Tax: €150.00

Shipping Information

Information on Stock Availability & Delivery


 

Stock item, next day delivery
Less than 5 stocked, next day delivery
Stock level usually 1, delivery could be delayed
Not a usual stock item, delivery time will vary.
Special Order Item, 4 to 6 Weeks Delivery.

 

Estimated stock and delivery time Only!

As we have multiple sales avenues we cannot guarantee product stock status. Any questions click the Chat button and someone will assist you.

Description

Details

Replaces the factory rubber steering rack bushings with precisely machined collars for a more direct steering feel.

 

Increasing front tire size wears out the factory rubber bushings quickly and increases steering play. Using rigid steering bushings produces a more linear steering response.

Vehicle Fitment

Suitable for Civic FD2 Type R

Customer Images

Here you can upload a cool photo of your part installed on your car and view others peoples aswell.

Upload 3 images of your part installed for the chance to get a discount off you next order!

Ask a Question

Product Enquiry

Other Customer Also Viewed the Following Products, TAKE A LOOK

  • 3DGT WING

    Product Overview

    Spoon Sports Carbon Fiber GT 3D Wing has been developed and honed under endurance racing conditions to develops a significant amount of downforce to increase rear end stability and grip.

     

    Width is 1500mm and stands are 300mm +/- 10mm

     

    Come with all bolts and brackets needed for installation. 

    3DGT WING

    84112-FD2-000-B
    Excl. Tax: €1,437.50 Incl. Tax: €1,725.00
  • LIMITED SLIP DIFF [1.5] (LSD)

    Product Overview

    The differential is a mechanical device that allows a flexible division of drive between the wheels allowing the car to corner. Load applied to the drive wheels during acceleration and cornering is always different from left to right wheel.  Due to this wheel spin can occur causing loss of control and acceleration performance.

     

    The Spoon LSD is a device which automatically reduces the loss of drive which can result from wheel spin on one side of the axle. In turn this conveys power and torque through the wheel with the most grip helping the wheel accelerate the car. In other words it is a necessity for all sport and race driving.

     

    The Spoon LSD is of Mechanical Type 1.5 way to front wheel drive applications and 1.75 way for rear wheels drive applications. Initial torque has been set at 9-9.5 KG (cold). As a characteristic of the mechanical LSD there is some dragging of the internal gear that can be felt in low speed cornering and clicking sound that can be heard.

    LIMITED SLIP DIFF [1.5] (LSD)

    41000-DC5-000-B
    Excl. Tax: €954.17 Incl. Tax: €1,145.00
  • MAGNETIC DRAIN BOLT SET

    Product Overview

    The Spoon Magnetic Drain Bolt Set uses a magnetic bolt to capture any metallic fragments in your engine away from the delicate engine internals. The magnetic drain set is performance for ensuring the protection of your high performance engine and gearbox

     

    Notice:

    Set replaces engine and gearbox oil drain bolts. Also available separately

    MAGNETIC DRAIN BOLT SET

    ALL-90009-000-B
    Excl. Tax: €33.33 Incl. Tax: €40.00
  • RADIATOR CAP, TYPE F

    Product Overview

    The Spoon Sports radiator cap functions to increase the pressure inside the radiator; the laws of physics then apply accordingly, even when the temperature of the coolant water exceeds 100°C, boiling can be avoided so gas bubbles and subsequent hot spots are avoided and increased cooling performance may be achieved.

     

    Notice:

    STD 1.1 increased to 1.35kgf/cm2

    Type D is suitable for most factory radiators

    Type F is suitable for most aftermarket radiators

    RADIATOR CAP, TYPE F

    ALL-19045-001-A
    Excl. Tax: €28.33 Incl. Tax: €34.00
  • Rigid Collar Front Kit

    Product Overview

    RIGID COLLAR are simple in their shape but clever in their design.

    Rigid Collars are made from a secret blend of space materials which ensures they mount perfectly flat between the chassis and subframe taking up any imperfection in the mounting surfaces.

    Rigid Collars cure chassis movement, improve handling, reduce road noise, reduce vibration, improve braking and make the car safer.

    This is achieved by the collar material, the tapered design and extremely high manufacturing tolerances.

    Rigid Collar Front Kit

    50261-FD2-000-D
    Excl. Tax: €229.17 Incl. Tax: €275.00

Upload images for this product

<