The Spoon rear control arm set for the S2000 allows you in reduce the effects of bump steer, caused by the change in geometry under compression or extension of the suspension. The effects of bump steer is increased when lowering the vehicle.
Installation of the Spoon rear control arms allows for a correction in geometry and individual adjustment of toe angle. Constructed from stainless steel for maximum strength and durability unlike most aftermarket alternatives that are usually constructed from alloy.
- Vehicle Fitment
Suitable for all S2000 AP1 & AP2
- Customer Images
Here you can upload a cool photo of your part installed on your car and view others peoples aswell.
Upload 3 images of your part installed for the chance to get a discount off you next order!
- Ask a Question
Other Customer Also Viewed the Following Products, TAKE A LOOK
Suitable for all 06+ AP2 2.2
Comes with all washers and bolts required to install
Spoon Sports Brake Hoses feature a No. 3 Teflon tube with a low expansion ratio in combination with a covering stainless-steel mesh, and through its implementation, it is possible to achieve braking which feels more direct and responsive.01460-AP2-000-CExcl. Tax: €329.17 Incl. Tax: €395.00
F20C engine stroked to 2.2L for fitment to all AP1 S2000.
Can be installed without any other mechanical modiciation. However ECU tuning recommended.
For the ultimate in endurance racing, we offer the Spoon Blueprinted Complete Engine Assembly. Each engine assembly is a JDM Honda long block straight from Spoon's engine assembly room. Spoon mechanics reassemble the engines with precision balances and blueprint each component down to 0.02g ensure optimum performance during endurance racing.
The engines are assembles in Spoon Type One workshop in Tokyo Japan. Each unit is assembled by hand under the close inspection of the highly experienced engineers. The engines are built to provide excellent performance, drivability and reliability.
During the build, you have the option of installing a range of Spoon performance upgrades which include Spoon Camshafts and a Spoon Baffled oil pan. These performance components are an additional cost to the engine build but there is no extra charge for fitting them.10000-F20-C01-DExcl. Tax: €11,529.17 Incl. Tax: €13,835.00
Suitable for S2000 AP1 MY04 - MY09 and all AP2
Fits all facelift AP1 and all AP2 S2000 - Vehicles with DBW throttle body.
Comes with replacementment gasket.
The Spoon throttle body is a reworked, brand new OEM Honda unit that has been taper bored and fitted with a large diameter butterfly.
The diamond cutting method used results in a mirror like surface finish internally which reduces resistance. During the cutting process the geometry of the body is changed to benefit from the venuri effect.
Engine and throttle response are improved, as is mid and upper rpm power. A 4-6hp improvement can be expected in the mid-rpm range.
The Spoon throttle body is a complete replacement unit and includes all necessary sensors.
To make the most of the venture effect and the increased air flow it is recommended that the inlet to the intake manifold is also enlarged. Potentially this will dramatically improve the potential horse power gains. Should you require this work to be carried out, please contact us as we can arrange for it to be done in our Race Engineering Workshop
Chassis number: AP1-100
65 mm (STD 62mm): diameter: 70mm (STD 67mm) diameter butterfly16400-AP2-020-DExcl. Tax: €920.83 Incl. Tax: €1,105.00
Suitable for all applications
Side mounting seat rail required for installation.
This Spoon Sports Carbon Fibre Seat is not only a beautiful lightweight seat ideal for racing and the road.
Unique cloth material was used which exhibits good moisture wicking while preventing the body from sliding. The bucket shape allows driver to withstand greater later-G loading with less effort. Shell has spine cut-out for increased comfort. Weighs 5.7 kg.
Fits all car models with most side mount rails. Carbon Kevlar construction..ALL-81100-000-DExcl. Tax: €1,175.00 Incl. Tax: €1,410.00
Suitable for all S2000 AP1 & AP2
Spoon Aero Mirrors attach to the factory location with no modifications necessary. Mirrors feature a wide angle view with a blue anti-glare tint. Folding function is spring loaded with clicks similar to the OEM mirror. Lens angle are adjusted manually.
Constructed in lightweight FRP and finished in a black ready for painting.76100-AP1-000-DExcl. Tax: €562.50 Incl. Tax: €675.00
Suitable for S2000 AP1, S2000 AP2
Comes will all fixtures and fittings for installation.
Spoon Sports Carbon Fiber GT 3D Wing has been developed and honed under endurance racing conditions to develops a significant amount of downforce to increase rear end stability and grip.
Width is 1500mm and stands are 300mm +/- 10mm
Come with all bolts and brackets needed for installation.84112-AP1-000-BExcl. Tax: €1,437.50 Incl. Tax: €1,725.00