Lightweight flywheels increase throttle response and aide in overall vehicle performance.
Reducing the overall weight of the flywheel from 6.4 Kgs to 4.2 kgs. Whilst retaining the strength and durability of the OEM part. Chromoly construction.
Developed to find the best balance by Bench testing, Street and Circuit.
Includes: Pilot bearing and clutch cover mounting bolts.
- Vehicle Fitment
Suitable for all S2000 AP1 and AP2
Will fit all F20C & F22C engines
Comes with replacement flywheel bolts and pilot bearing.
- Customer Images
Here you can upload a cool photo of your part installed on your car and view others peoples aswell.
Upload 3 images of your part installed for the chance to get a discount off you next order!
- Ask a Question
Other Customer Also Viewed the Following Products, TAKE A LOOK
Suitable for all S2000 AP1 & AP2
The Spoon Full Spec Coilovers feature chromoly steel body with aluminium components and perches. Independent compression and height adjustability with a 45mm piston.
Front Spring Rate (14 kg/mm)
Rear Spring Rate (12 kg/mm)
Suggested ride height - front 645mm and rear 635mm51600-AP1-G20-DExcl. Tax: €2,041.67 Incl. Tax: €2,450.00
Suitable for all S2000 AP1 or AP2
This is also the correct fitment for the Monoblock caliper
Spoon brake pads feature high resistance to fading, excellent performance at low temperatures, near stock life expectancy, and low rotor wear. These properties are achieved through a combination of pad material and unique backing metal design.
Spoon brake pads provide strong braking power while maintaining stable, consistent, and direct driving feel. This allows drivers to enter corners smoothly. The operating range is 50 - 700C, while the optimum rotor temperature is between 200 - 300C.45022-AP1-000-AExcl. Tax: €229.17 Incl. Tax: €275.00
For use with the Spoon AERO rear bumper (71501-AP1-001)
Can be retrofitted to other rear bumpers at the users choice.
Additional carbon fiber diffuser for fitment to the new Aero Bumper.
Developed to further channel air from unearth the car to improve airflow and downforce.
Material – Carbon fiber71502-AP1-001-BExcl. Tax: €683.33 Incl. Tax: €820.00
Suitable for S2000 AP2
NEW OEM Differential Housing fitted with Spoon Sports Plate LSD and 4.4 Final Drive.41200-AP2-C00-DExcl. Tax: €3,295.83 Incl. Tax: €3,955.00
Suitiable for S2000 AP1 and AP2 models.
Fits all F20C and F22C engines
Direct replacement for existing sump pan
Comes with replacement gaskets and HAMP oil filter
In fast cornering it is possible for the engine so suffer low oil pressure due to oil starvation. This is caused by the lateral G forces pulling the oil away from the pickup.
The addition of the specially designed baffle plate to a genuine Honda sump makes it possible to prevent this occurrence. The Installation of a baffled oil pan is highly recommended when the vehicle is being used in a high G environment such as circuit racing / testing to prevent engine blow.
All Spoon Baffled Sumps include a replacement sum gasket and HAMP oil filter.11200-AP1-001-BExcl. Tax: €479.17 Incl. Tax: €575.00
Suitable for S2000 AP1 MY04<, S2000 AP2
AP1-130< (more commonly known as post 2004 manufacture year) or AP2 . After 2004 there was a suspension revision on the rear upper arms where the bushes used were changed.
If you are unsure then please measure your rear upper arm bush. If the hole diameter is 35mm x 47mm in length then you will require the earlier kit. If you the holes measure 42mm diameter x 57mm in length then you will require this kit.
The Spoon suspension bushes feature increased rigidity over the standard bushes to increase the suspension performance, feel and handling but without losing overall compliance.51359-AP1-020-DExcl. Tax: €804.17 Incl. Tax: €965.00