S2000 AP1 / AP2

Product Type
  1. INTAKE
    INTAKE
  2. EXHAUST
    EXHAUST
  3. POWERUNIT
    POWERUNIT
  4. BRAKES
    BRAKES
  5. REINFORCEMENT
    REINFORCEMENT
  6. COOLING
    COOLING
  7. DRIVETRAIN
    DRIVETRAIN
  8. INTERIOR
    INTERIOR
  9. EXTERIOR
    EXTERIOR
  10. SUSPENSION
    SUSPENSION
  11. WHEEL SETS
    WHEEL SETS
Brake Component Type
  1. Brake Lines

Set Ascending Direction

1-12 of 153

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  • ZERO BUMP STEER KIT [FRONT]

    Product Overview

    Bump Steer or Roll Steer is when your wheels steer themselves without input from the steering wheel. This effect happened when the vehicle suspension comes under compression or extension. When a car is designed and built, it is set up in a way to minimise this.

    This undesirable effect can make the vehicles handling very unpredictable, especially on the limit

    When modifiers make changed to their suspension geometry it can effect bump steer. This most commonly occurs when lowering a car.

    Spoon have developed the Zero Bump Steer Kit for the front of the S2000 (AP1/2) to combat this potentially dangerous effect. Once installed the Turn in roll will feel more neutral, the steering wheel will return smoothly to its canter alignment and camber will be optimised.

    Constructed from stainless steel for maximum strength and durability unlike most aftermarket alternatives that are usually constructed from alloy.

    ZERO BUMP STEER KIT [FRONT]

    53438-AP1-010-A
    Excl. Tax: €158.33 Incl. Tax: €190.00

  • WIDE FENDER [FRONT]

    Product Overview

    Fits all S2000 model years. FRP Construction. Widens front end by 20mm. Includes flare attachments for front bumper.

     

    Finished in white and ready to paint. 

    WIDE FENDER [FRONT]

    60200-AP1-000-B
    Excl. Tax: €729.17 Incl. Tax: €875.00

  • 19210-PCX-003

    Product Overview

    Genuine Honda Water Pump - AP1

    Water Pump - AP1

    19210-PCX-003-E
    Excl. Tax: €151.67 Incl. Tax: €182.00

  • VENTURI BIG THROTTLE BODY

    Product Overview

    The Spoon throttle body is a reworked, brand new OEM Honda unit that has been taper bored and fitted with a large diameter butterfly.  

    The diamond cutting method used results in a mirror like surface finish internally which reduces resistance. During the cutting process the geometry of the body is changed to benefit from the venuri effect.

    Engine and throttle response are improved, as is mid and upper rpm power. A 4-6hp improvement can be expected in the mid-rpm range.

    The Spoon throttle body is a complete replacement unit and includes all necessary sensors.

    To make the most of the venture effect and the increased air flow it is recommended that the inlet to the intake manifold is also enlarged. Potentially this will dramatically improve the potential horse power gains. Should you require this work to be carried out, please contact us as we can arrange for it to be done in our Race Engineering Workshop

    Remarks:

    Chassis number: AP1-100 
    65 mm (STD 62mm): diameter: 70mm (STD 67mm) diameter butterfly 

    VENTURI BIG THROTTLE BODY

    16400-AP2-020-D
    Excl. Tax: €920.83 Incl. Tax: €1,105.00

  • VENTURI BIG THROTTLE BODY

    Product Overview

    The Spoon throttle body is a reworked, brand new OEM Honda unit that has been taper bored and fitted with a large diameter butterfly.  

    The diamond cutting method used results in a mirror like surface finish internally which reduces resistance. During the cutting process the geometry of the body is changed to benefit from the venuri effect.

    Engine and throttle response are improved, as is mid and upper rpm power. A 4-6hp improvement can be expected in the mid-rpm range.

    The Spoon throttle body is a complete replacement unit and includes all necessary sensors.

    To make the most of the venture effect and the increased air flow it is recommended that the inlet to the intake manifold is also enlarged. Potentially this will dramatically improve the potential horse power gains. Should you require this work to be carried out, please contact us as we can arrange for it to be done in our Race Engineering Workshop

    Remarks:

    Chassis number: AP2-100 
    65 mm (STD 62mm): diameter: 70mm (STD 67mm) diameter butterfly 

    VENTURI BIG THROTTLE BODY

    16400-AP1-040-D
    Excl. Tax: €920.83 Incl. Tax: €1,105.00

  • 12011-PCX-010

    Product Overview

    Genuine Honda Value Guide - Exhaust - AP1

    Value Guide - Exhaust - AP1

    12011-PCX-010-E
    Excl. Tax: €14.17 Incl. Tax: €17.00

  • UPRATED DAMPER KIT

    Product Overview

    The Spoon fixed type suspension is designed for improved handling and sports driving but without the complication of damper and height adjustment.

    Features-

    • Designed for use with high grip radial tires and occasional circuit use
    • Can be used with the standard springs
    • Designed for sport driving
    • No height or damper adjustment capability
    • Constructed by SHOWA (original Honda manufacturer) for impeccable quality and longevity 

    For best results we recommend use with the Spoon Sports Progressive Spring kit

    Ideal for the everyday use driver that may track occasionally or enjoys a sportier feel. 

     

    Notice:

    Compression / force

    0.05m/sec: F10/-17kgf R26/-27kgf

    0.1m/sec: F60/-54kgf R70/-56kgf

    0.3m/sec: F95/-69kgf R105/-73kgf

    UPRATED DAMPER KIT

    51600-AP1-000-D
    Excl. Tax: €1,175.00 Incl. Tax: €1,410.00

  • UPRATED CLUTCH COVER

    Product Overview

    The Spoon clutch cover, or pressure plate increases clamping force by 30% with pedal feel almost unchanged and operation as smooth as OEM.

     By increasing the contact pressure by a factor of 30%, considerable improvements in slipping, abnormal wearing, and shudder can be reduced - even in hard-driving situations.

    UPRATED CLUTCH COVER

    22300-AP1-001-B
    Excl. Tax: €370.83 Incl. Tax: €445.00

  • UPPER WISHBONE GUSSET PLATE

    Product Overview

    Spoon have found during the race car development, the front upper arm attachment point is inherently weak and can flex or worse, peel off.  Although later model S2000’s benefited from the addition reinforcement from the factory, it is not enough to prevent chassis flex. The Spoon gusset plate reinforces the front upper arm attachment point for enhance suspension rigidity and responsiveness.

     

    Constructed from high tensile steel for the highest quality. Requires welding for installation. 

    UPPER WISHBONE GUSSET PLATE

    60815-AP1-010-D
    Excl. Tax: €462.50 Incl. Tax: €555.00

  • UPPER WISHBONE GUSSET PLATE

    Product Overview

    Spoon have found during the race car development, the front upper arm attachment point is inherently weak and can flex or worse, peel off.  Although later model S2000’s benefited from the addition reinforcement from the factory, it is not enough to prevent chassis flex. The Spoon gusset plate reinforces the front upper arm attachment point for enhance suspension rigidity and responsiveness.

     

    Constructed from high tensile steel for the highest quality. Requires welding for installation. 

    UPPER WISHBONE GUSSET PLATE

    60815-AP1-000-D
    Excl. Tax: €462.50 Incl. Tax: €555.00

  • TRANSMISSION OVERHAUL

    Product Overview

    The Spoon (F20C) AP1 Transmission unit is an Overhaul item which will require your gearbox being sent for a full rebuild by Spoon. The same precision and dedication that is applied to the Spoon engine build is the same for the Spoon transmission overhaul - to ensure optimum performance for all driving conditions.

    During the rebuild the customer also has the option of installing a range of Spoon performance upgrades; New Spoon LSD, or LSD Overhaul Set, and Cross Gear Set. These performance components are an additional cost to the Transmission build but there is no extra charge for fitting them.

    Please Note: This Transmission is sold on an exchange basis, you must supply us your Transmission after purchase has been made.

    TRANSMISSION OVERHAUL

    20000-AP1-901-D
    Excl. Tax: €2,941.67 Incl. Tax: €3,530.00

  • 14510-PCX-005

    Product Overview

    Genuine Honda Timing Chain Tensioner - AP1

    Timing Chain Tensioner - AP1

    14510-PCX-005-E
    Excl. Tax: €182.50 Incl. Tax: €219.00

Set Ascending Direction

1-12 of 153

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Shipping Information

Information on Stock Availability & Delivery


 

Stock item, next day delivery
Less than 5 stocked, next day delivery
Stock level usually 1, delivery could be delayed
Not a usual stock item, delivery time will vary.
Special Order Item, 4 to 6 Weeks Delivery.

 

Estimated stock and delivery time Only!

As we have multiple sales avenues we cannot guarantee product stock status. Any questions click the Chat button and someone will assist you.

Product Enquiry

<

Loading, please wait ... Loading, please wait ...