STEERING WHEEL BOSS

STEERING WHEEL BOSS

STEERING WHEEL BOSS

Product No. 78512-AP1-000-A

Availability:

Excl. Tax: €125.00 Incl. Tax: €150.00

Shipping Information

Information on Stock Availability & Delivery


 

Stock item, next day delivery
Less than 5 stocked, next day delivery
Stock level usually 1, delivery could be delayed
Not a usual stock item, delivery time will vary.
Special Order Item, 4 to 6 Weeks Delivery.

 

Estimated stock and delivery time Only!

As we have multiple sales avenues we cannot guarantee product stock status. Any questions click the Chat button and someone will assist you.

Description

Details

Lightweight Spoon Steering Boss to allow direct fitment of the MOMO / NARD steering wheel.

 

Where applicable, supplied with SRS harness plug to prevent SRS check light. 

 

NB. On installation steering wheel retaining nut should be installed without grease and tightened to 30NM 

Vehicle Fitment

Suitable for S2000 AP1, S2000 AP2, Civic EK9 Type R, Civic EP3 Type R, Accord CL7 Euro R, Integra DC5 Type R, FIT / Jazz GD1 / GD3

SRS delete wiring included.

Customer Images

Here you can upload a cool photo of your part installed on your car and view others peoples aswell.

Upload 3 images of your part installed for the chance to get a discount off you next order!

Ask a Question

Product Enquiry

Other Customer Also Viewed the Following Products, TAKE A LOOK

  • RADIATOR CAP, TYPE F

    Product Overview

    The Spoon Sports radiator cap functions to increase the pressure inside the radiator; the laws of physics then apply accordingly, even when the temperature of the coolant water exceeds 100°C, boiling can be avoided so gas bubbles and subsequent hot spots are avoided and increased cooling performance may be achieved.

     

    Notice:

    STD 1.1 increased to 1.35kgf/cm2

    Type D is suitable for most factory radiators

    Type F is suitable for most aftermarket radiators

    RADIATOR CAP, TYPE F

    ALL-19045-001-A
    Excl. Tax: €28.33 Incl. Tax: €34.00
  • BRAKE PAD [REAR]

    Product Overview

    Spoon brake pads feature high resistance to fading, excellent performance at low temperatures, near stock life expectancy, and low rotor wear. These properties are achieved through a combination of pad material and unique backing metal design.

     

    Spoon brake pads provide strong braking power while maintaining stable, consistent, and direct driving feel. This allows drivers to enter corners smoothly. The operating range is 50 - 700C, while the optimum rotor temperature is between 200 - 300C.

    BRAKE PAD [REAR]

    43022-EK9-000-A
    Excl. Tax: €208.33 Incl. Tax: €250.00
  • MAGNETIC DRAIN BOLT SET

    Product Overview

    The Spoon Magnetic Drain Bolt Set uses a magnetic bolt to capture any metallic fragments in your engine away from the delicate engine internals. The magnetic drain set is performance for ensuring the protection of your high performance engine and gearbox

     

    Notice:

    Set replaces engine and gearbox oil drain bolts. Also available separately

    MAGNETIC DRAIN BOLT SET

    ALL-90009-000-B
    Excl. Tax: €33.33 Incl. Tax: €40.00
  • BRAKE ROTOR [FRONT]

    Product Overview

    When installing the Spoon Monoblock calipers to the DC2, DB8, EK9, or CL7 (late). The installation requires the use of the Spoon 300x26mm rotor. Specially designed to allow the use of the monoblock caliper.

    BRAKE ROTOR [FRONT]

    45251-5H11416-A
    Excl. Tax: €125.00 Incl. Tax: €150.00
  • FINAL GEAR SET (5.3)

    Product Overview

    Spoon Sports final drive ratio gives and overall reduction in all gearing. This allows for improved acceleration and achievable top speed. An excellent modification to allow for a better use of engine power.

     

    Remarks

    5.333

    FINAL GEAR SET (5.3)

    41220-FD2-101-C
    Excl. Tax: €437.50 Incl. Tax: €525.00
  • LIMITED SLIP DIFF [1.5] (LSD)

    Product Overview

    The differential is a mechanical device that allows a flexible division of drive between the wheels allowing the car to corner. Load applied to the drive wheels during acceleration and cornering is always different from left to right wheel.  Due to this wheel spin can occur causing loss of control and acceleration performance.

     

    The Spoon LSD is a device which automatically reduces the loss of drive which can result from wheel spin on one side of the axle. In turn this conveys power and torque through the wheel with the most grip helping the wheel accelerate the car. In other words it is a necessity for all sport and race driving.

     

    The Spoon LSD is of Mechanical Type 1.5 way to front wheel drive applications and 1.75 way for rear wheels drive applications. Initial torque has been set at 9-9.5 KG (cold). As a characteristic of the mechanical LSD there is some dragging of the internal gear that can be felt in low speed cornering and clicking sound that can be heard.

    LIMITED SLIP DIFF [1.5] (LSD)

    41000-DC5-000-B
    Excl. Tax: €954.17 Incl. Tax: €1,145.00

Upload images for this product

<