Fits all S2000 model years. Carbon Fiber /FRP construction.
Developed in part with Mooncraft corporation and years of endurance racing. The Spoon hardtop improves the aerodynamics of the vehicle for improved fuel mileage and aerodynamic efficiency. A Must have for any S2000 race car.
- Vehicle Fitment
Suitable for all S2000 AP1 & AP2
- Customer Images
Here you can upload a cool photo of your part installed on your car and view others peoples aswell.
Upload 3 images of your part installed for the chance to get a discount off you next order!
- Ask a Question
Other Customer Also Viewed the Following Products, TAKE A LOOK
Suitiable for S2000 AP1 and AP2 models.
Fits all F20C and F22C engines
Direct replacement for existing sump pan
Comes with replacement gaskets and HAMP oil filter
In fast cornering it is possible for the engine so suffer low oil pressure due to oil starvation. This is caused by the lateral G forces pulling the oil away from the pickup.
The addition of the specially designed baffle plate to a genuine Honda sump makes it possible to prevent this occurrence. The Installation of a baffled oil pan is highly recommended when the vehicle is being used in a high G environment such as circuit racing / testing to prevent engine blow.
All Spoon Baffled Sumps include a replacement sum gasket and HAMP oil filter.11200-AP1-001-BExcl. Tax: €479.17 Incl. Tax: €575.00
F20C engine stroked to 2.2L for fitment to all AP1 S2000.
Can be installed without any other mechanical modiciation. However ECU tuning recommended.
For the ultimate in endurance racing, we offer the Spoon Blueprinted Complete Engine Assembly. Each engine assembly is a JDM Honda long block straight from Spoon's engine assembly room. Spoon mechanics reassemble the engines with precision balances and blueprint each component down to 0.02g ensure optimum performance during endurance racing.
The engines are assembles in Spoon Type One workshop in Tokyo Japan. Each unit is assembled by hand under the close inspection of the highly experienced engineers. The engines are built to provide excellent performance, drivability and reliability.
During the build, you have the option of installing a range of Spoon performance upgrades which include Spoon Camshafts and a Spoon Baffled oil pan. These performance components are an additional cost to the engine build but there is no extra charge for fitting them.10000-F20-C01-DExcl. Tax: €11,529.17 Incl. Tax: €13,835.00
Suitable for all S2000 AP1 & AP2
The Spoon Full Spec Coilovers feature chromoly steel body with aluminium components and perches. Independent compression and height adjustability with a 45mm piston.
Front Spring Rate (14 kg/mm)
Rear Spring Rate (12 kg/mm)
Suggested ride height - front 645mm and rear 635mm51600-AP1-G20-DExcl. Tax: €2,041.67 Incl. Tax: €2,450.00
Suitable for all S2000 AP1
The kit contains 0.25mm oversize pistons. The block will require boring and finishing to manufacture oversize specification.
The Spoon F20C Stroker has been designed to allow the standard Honda F20C be over stroked to the 2.2L capacity. Unleashing torque that some have complained the S2000 was missing in the past and increasing power.
The kit comprises of: Head gasket, crankshaft, connecting rods, forged pistons, rings, pins, oil jet. All parts are selected and balanced within .2g with a total rotational tolerance of less than 1g
Kit supplied with 0.25mm over bore pistons and rings
Higher compression will be achieved 11.8:1 (STD 11.7:1) Inner diameter × stroke (mm): 87.25 × 90.713000-F22-000-BExcl. Tax: €2,625.00 Incl. Tax: €3,150.00