The Spoon Full Spec Coilovers feature chromoly steel body with aluminium components and perches. Independent compression and height adjustability with a 45mm piston.
Front Spring Rate (14 kg/mm)
Rear Spring Rate (12 kg/mm)
Suggested ride height - front 645mm and rear 635mm
- Vehicle Fitment
Suitable for all S2000 AP1 & AP2
- Customer Images
Here you can upload a cool photo of your part installed on your car and view others peoples aswell.
Upload 3 images of your part installed for the chance to get a discount off you next order!
- Ask a Question
Other Customer Also Viewed the Following Products, TAKE A LOOK
Suitable for S2000 AP1, S2000 AP2
Comes will all fixtures and fittings for installation.
Spoon Sports Carbon Fiber GT 3D Wing has been developed and honed under endurance racing conditions to develops a significant amount of downforce to increase rear end stability and grip.
Width is 1500mm and stands are 300mm +/- 10mm
Come with all bolts and brackets needed for installation.84112-AP1-000-BExcl. Tax: €1,437.50 Incl. Tax: €1,725.00
Like for Like replacement engine for the S2000 AP1
For the ultimate in endurance racing, we offer the Spoon Blueprinted Complete Engine Assembly. Each engine assembly is a JDM Honda long block straight from Spoon's engine assembly room. Spoon mechanics reassemble the engines with precision balances and blueprint each component down to 0.02g ensure optimum performance during endurance racing.
The engines are assembles in Spoon Type One workshop in Tokyo Japan. Each unit is assembled by hand under the close inspection of the highly experienced engineers. The engines are built to provide excellent performance, drivability and reliability.
During the build, you have the option of installing a range of Spoon performance upgrades which include Spoon Camshafts and a Spoon Baffled oil pan. These performance components are an additional cost to the engine build but there is no extra charge for fitting them.10000-F20-C00-DExcl. Tax: €11,529.17 Incl. Tax: €13,835.00
Suitable for all S2000 AP1 & AP2
Fits all S2000 model years. FRP Construction. Widens front end by 20mm. Includes flare attachments for front bumper.
Finished in white and ready to paint.60200-AP1-000-BExcl. Tax: €729.17 Incl. Tax: €875.00
Suitable for most aftermarket radiators
The Spoon Sports radiator cap functions to increase the pressure inside the radiator; the laws of physics then apply accordingly, even when the temperature of the coolant water exceeds 100Â°C, boiling can be avoided so gas bubbles and subsequent hot spots are avoided and increased cooling performance may be achieved.
STD 1.1 increased to 1.35kgf/cm2
Type D is suitable for most factory radiators
Type F is suitable for most aftermarket radiatorsALL-19045-001-AExcl. Tax: €28.33 Incl. Tax: €34.00
Suitable for S2000 AP1 MY99 - MY04
Fit all AP1 S2000 pre facelift
Comes with replacementment gasket.
The Spoon throttle body is a reworked, brand new OEM Honda unit that has been taper bored and fitted with a large diameter butterfly.
The diamond cutting method used results in a mirror like surface finish internally which reduces resistance. During the cutting process the geometry of the body is changed to benefit from the venuri effect.
Engine and throttle response are improved, as is mid and upper rpm power. A 4-6hp improvement can be expected in the mid-rpm range.
The Spoon throttle body is a complete replacement unit and includes all necessary sensors.
To make the most of the venture effect and the increased air flow it is recommended that the inlet to the intake manifold is also enlarged. Potentially this will dramatically improve the potential horse power gains. Should you require this work to be carried out, please contact us as we can arrange for it to be done in our Race Engineering Workshop
Chassis number: AP2-100
65 mm (STD 62mm): diameter: 70mm (STD 67mm) diameter butterfly16400-AP1-040-DExcl. Tax: €920.83 Incl. Tax: €1,105.00