ENGINE TRANSMISSION MOUNT SET

ENGINE TRANSMISSION MOUNT SET

ENGINE TRANSMISSION MOUNT SET

Product No. 50800-DCR-G00-A

Availability:

Excl. Tax: €395.83 Incl. Tax: €475.00

Shipping Information

Information on Stock Availability & Delivery


 

Stock item, next day delivery
Less than 5 stocked, next day delivery
Stock level usually 1, delivery could be delayed
Not a usual stock item, delivery time will vary.
Special Order Item, 4 to 6 Weeks Delivery.

 

Estimated stock and delivery time Only!

As we have multiple sales avenues we cannot guarantee product stock status. Any questions click the Chat button and someone will assist you.

Description

Details

With the Spoon engine and transmission mounts the rubber hardness is increased from 55-75 (Shore D) and the effective spring rate of the bush is increased from 6kgf/mm to 14kgf/mm


A great modification when you are looking to freshen up the feel on an older car or looking to reduce unpleasant engine vibration. 

Vehicle Fitment

Suitable for Integra DC2 Type R, Integra DB8 Type R

Customer Images

Here you can upload a cool photo of your part installed on your car and view others peoples aswell.

Upload 3 images of your part installed for the chance to get a discount off you next order!

Ask a Question

Product Enquiry

Other Customer Also Viewed the Following Products, TAKE A LOOK

  • CLOSE RATIO GEAR KIT

    Product Overview

    The Spoon Cross Gear set for the EG6, EK4, EK9, DC2 and DB8 replaces all the gears for shorter and more track suitable ratios for fast road and race purposes. The ratios have been matched to that used by gp. A race cars.

    The standard long ratios are designed for economy and comfort, they allow a high (70-80mph) speed cruising at lower engine RPMS. Whilst this avoids using the VTEC cam to save on fuel, it is not the optimum arrangement to best use the engine power and torque.

    Spoon have reduced all the ratios to shorten them and allow the user to better use the power and increase acceleration. Achievable top speed will be reduced and become realistic.

    Many customers comment this is the single most circuit beneficial medication they make to their vehicle.

    Ratios: Spoon (Std)

    1st: 2.533 (3.231)

    2nd: 1.944 (2.105)

    3rd: 1.591 (1.458)

    4th: 1.280 (1.103)

    5th: 1.033 (0.848)

    CLOSE RATIO GEAR KIT

    23000-EG6-100-D
    Excl. Tax: €2,125.00 Incl. Tax: €2,550.00
  • COMPLETE BLUEPRINTED ENGINE [1.8L]

    Product Overview

    For the ultimate in endurance racing, we offer the Spoon Blueprinted Complete Engine Assembly. Each engine assembly is a JDM Honda long block straight from Spoon's engine assembly room. Spoon mechanics reassemble the engines with precision balances and blueprint each component down to 0.02g ensure optimum performance during endurance racing.

    The engines are assembles in Spoon Type One workshop in Tokyo Japan. Each unit is assembled by hand under the close inspection of the highly experienced engineers. The engines are built to provide excellent performance, drivability and reliability.

    During the build, you have the option of installing a range of Spoon performance upgrades which include Spoon Camshafts and a Spoon Baffled oil pan. These performance components are an additional cost to the engine build but there is no extra charge for fitting them. 

    COMPLETE BLUEPRINTED ENGINE [1.8L]

    10000-18C-C00-D
    Excl. Tax: €10,354.17 Incl. Tax: €12,425.00
  • RADIATOR CAP, TYPE F

    Product Overview

    The Spoon Sports radiator cap functions to increase the pressure inside the radiator; the laws of physics then apply accordingly, even when the temperature of the coolant water exceeds 100°C, boiling can be avoided so gas bubbles and subsequent hot spots are avoided and increased cooling performance may be achieved.

     

    Notice:

    STD 1.1 increased to 1.35kgf/cm2

    Type D is suitable for most factory radiators

    Type F is suitable for most aftermarket radiators

    RADIATOR CAP, TYPE F

    ALL-19045-001-A
    Excl. Tax: €28.33 Incl. Tax: €34.00
  • BLUPRINTED DRIVE SHAFT SET

    Product Overview

    The importance of a reliable driveshaft is often overlooked in endurance racing to street applications. The standard Honda units do not lack strength themselves, the troubles and failure of the driveshafts are often the finishing quality. Slight pitting can occur on the contact surfaces, which under high heat deteriorate which then cause vibrations and failure.

     

    The Spoon drive shafts are standard Honda units that have been disassembled then reworked and reassembled by Spoon technicians. Each contact surface has been polished and finished to exacting standards and then the components are matched during assembly to ensure the highest tolerances.

     

    This ensures a smooth power delivery and reliable service 

    BLUPRINTED DRIVE SHAFT SET

    42300-EK9-C00-D
    Excl. Tax: €1,650.00 Incl. Tax: €1,980.00
  • BRAKE PAD [REAR]

    Product Overview

    Spoon brake pads feature high resistance to fading, excellent performance at low temperatures, near stock life expectancy, and low rotor wear. These properties are achieved through a combination of pad material and unique backing metal design.

     

    Spoon brake pads provide strong braking power while maintaining stable, consistent, and direct driving feel. This allows drivers to enter corners smoothly. The operating range is 50 - 700C, while the optimum rotor temperature is between 200 - 300C.

    BRAKE PAD [REAR]

    43022-EFA-000-A
    Excl. Tax: €208.33 Incl. Tax: €250.00

Upload images for this product

<