Spoon brake pads feature high resistance to fading, excellent performance at low temperatures, near stock life expectancy, and low rotor wear. These properties are achieved through a combination of pad material and unique backing metal design.
Spoon brake pads provide strong braking power while maintaining stable, consistent, and direct driving feel. This allows drivers to enter corners smoothly. The operating range is 50 - 700C, while the optimum rotor temperature is between 200 - 300C.
- Vehicle Fitment
Suitable for all S2000 AP1 or AP2
This is also the correct fitment for the Monoblock caliper
- Customer Images
Here you can upload a cool photo of your part installed on your car and view others peoples aswell.
Upload 3 images of your part installed for the chance to get a discount off you next order!
- Ask a Question
Other Customer Also Viewed the Following Products, TAKE A LOOK
Suitable for all 06+ AP2 2.2
Comes with all washers and bolts required to install
Spoon Sports Brake Hoses feature a No. 3 Teflon tube with a low expansion ratio in combination with a covering stainless-steel mesh, and through its implementation, it is possible to achieve braking which feels more direct and responsive.01460-AP2-000-CExcl. Tax: €329.17 Incl. Tax: €395.00
Suitable for all applications
Side mounting seat rail required for installation.
This Spoon Sports Carbon Fibre Seat is not only a beautiful lightweight seat ideal for racing and the road.
Unique cloth material was used which exhibits good moisture wicking while preventing the body from sliding. The bucket shape allows driver to withstand greater later-G loading with less effort. Shell has spine cut-out for increased comfort. Weighs 5.7 kg.
Fits all car models with most side mount rails. Carbon Kevlar construction..ALL-81100-000-DExcl. Tax: €1,175.00 Incl. Tax: €1,410.00
For use with the Spoon S-Tai front bumper
Un restricted air duct to air box.
The Spoon Engine Fresh Air Duct has been developed for use with the Spoon S-tai bonnet and front bumper. Woking in the same principle as the Spoon Carbon Air Duct, the ducting allows for cold air from a high pressure point on the front bumper to be fed directly in to the air box. The difference between this and the carbon air duct is it utilises the extra space made available by the S-tai bumper and bonnet to give an unrestricted flow of air to the all-important air box.60100-AP1-S01-AExcl. Tax: €404.17 Incl. Tax: €485.00
F20C engine stroked to 2.2L for fitment to all AP1 S2000.
Can be installed without any other mechanical modiciation. However ECU tuning recommended.
For the ultimate in endurance racing, we offer the Spoon Blueprinted Complete Engine Assembly. Each engine assembly is a JDM Honda long block straight from Spoon's engine assembly room. Spoon mechanics reassemble the engines with precision balances and blueprint each component down to 0.02g ensure optimum performance during endurance racing.
The engines are assembles in Spoon Type One workshop in Tokyo Japan. Each unit is assembled by hand under the close inspection of the highly experienced engineers. The engines are built to provide excellent performance, drivability and reliability.
During the build, you have the option of installing a range of Spoon performance upgrades which include Spoon Camshafts and a Spoon Baffled oil pan. These performance components are an additional cost to the engine build but there is no extra charge for fitting them.10000-F20-C01-DExcl. Tax: €11,529.17 Incl. Tax: €13,835.00
Suitable for all S2000 AP1
The kit contains 0.25mm oversize pistons. The block will require boring and finishing to manufacture oversize specification.
The Spoon F20C Stroker has been designed to allow the standard Honda F20C be over stroked to the 2.2L capacity. Unleashing torque that some have complained the S2000 was missing in the past and increasing power.
The kit comprises of: Head gasket, crankshaft, connecting rods, forged pistons, rings, pins, oil jet. All parts are selected and balanced within .2g with a total rotational tolerance of less than 1g
Kit supplied with 0.25mm over bore pistons and rings
Higher compression will be achieved 11.8:1 (STD 11.7:1) Inner diameter × stroke (mm): 87.25 × 90.713000-F22-000-BExcl. Tax: €2,625.00 Incl. Tax: €3,150.00