The differential is a mechanical device that allows a flexible division of drive between the wheels allowing the car to corner. Load applied to the drive wheels during acceleration and cornering is always different from left to right wheel. Due to this wheel spin can occur causing loss of control and acceleration performance.
The Spoon LSD is a device which automatically reduces the loss of drive which can result from wheel spin on one side of the axle. In turn this conveys power and torque through the wheel with the most grip helping the wheel accelerate the car. In other words it is a necessity for all sport and race driving.
The Spoon LSD is of Mechanical Type 1.5 way to front wheel drive applications and 1.75 way for rear wheels drive applications. Initial torque has been set at 9-9.5 KG (cold). As a characteristic of the mechanical LSD there is some dragging of the internal gear that can be felt in low speed cornering and clicking sound that can be heard.
- Vehicle Fitment
Suitable for Civic EK9 Type R, Integra DC2 Type R, Integra DB8 Type R
Comes with bearings required for installation
- Customer Images
Here you can upload a cool photo of your part installed on your car and view others peoples aswell.
Upload 3 images of your part installed for the chance to get a discount off you next order!
- Ask a Question
Other Customer Also Viewed the Following Products, TAKE A LOOK
Suitable for most aftermarket radiators
The Spoon Sports radiator cap functions to increase the pressure inside the radiator; the laws of physics then apply accordingly, even when the temperature of the coolant water exceeds 100Â°C, boiling can be avoided so gas bubbles and subsequent hot spots are avoided and increased cooling performance may be achieved.
STD 1.1 increased to 1.35kgf/cm2
Type D is suitable for most factory radiators
Type F is suitable for most aftermarket radiatorsALL-19045-001-AExcl. Tax: €28.33 Incl. Tax: €34.00
Suitable for Civic EG6, Civic EK4, Civic EK9 Type R, Integra DC2 Type R, Integra DB8 Type R
Will fit all B16A, B16B, B18C engines
The Spoon non-asbestos clutch disc is full faced for increased power handling whilst maintaining the smooth clutch action as felt with the standard clutch.
Combined with the Spoon Clutch Cover and other parts power increase of 30% can be handled without comprising clutch feel or smoothness.
Can also be interchanged with to work with a standard clutch cover.22200-EG6-001-BExcl. Tax: €137.50 Incl. Tax: €165.00
Suitable for Civic EK9 Type R, Civic FN2 Type R, CR-Z ZF1 and ZF2, Integra DC2 Type R, Integra DB8 Type R
All applications above require the 300x26mm conversion disc 45251-5H11416
S2000 profile brake pad required.
The Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads and controlling future costs. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.
The 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction greatly reduces un-sprung weight. These benefits are achieved while maintaining a stock feel for daily driving.
Spoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. When the S2000 was released, Spoon designed the mono-block caliper with a one piece construction and greatly improved rigidity. This has now been made available for most models of Honda.
PLEASE NOTE: This caliper kit is for use with the CL7, DC2 EK9, CR-Z. For installation you will also require a pair of 300mm discs, these can also be supplied: Part number 45251-5H1141645020-MBF-G01-BExcl. Tax: €1,245.83 Incl. Tax: €1,495.00