The differential is a mechanical device that allows a flexible division of drive between the wheels allowing the car to corner. Load applied to the drive wheels during acceleration and cornering is always different from left to right wheel. Due to this wheel spin can occur causing loss of control and acceleration performance.
The Spoon LSD is a device which automatically reduces the loss of drive which can result from wheel spin on one side of the axle. In turn this conveys power and torque through the wheel with the most grip helping the wheel accelerate the car. In other words it is a necessity for all sport and race driving.
The Spoon LSD is of Mechanical Type 1.5 way to front wheel drive applications and 1.75 way for rear wheels drive applications. Initial torque has been set at 9-9.5 KG (cold). As a characteristic of the mechanical LSD there is some dragging of the internal gear that can be felt in low speed cornering and clicking sound that can be heard.
- Vehicle Fitment
Suitable for alll S2000 AP1 & AP2
Comes with bearings required for installation
- Customer Images
Here you can upload a cool photo of your part installed on your car and view others peoples aswell.
Upload 3 images of your part installed for the chance to get a discount off you next order!
- Ask a Question
Other Customer Also Viewed the Following Products, TAKE A LOOK
Suitable for all applications when installed with correct steering boss.
The SPOON Steering Wheel is made by the top notch steering wheel manufacturer MOMO. 340mm in diameter and featuring a strong extra thick grip, this steering wheel will give you maximum performance and feel.
Fits all Momo compatible steering hubs. Leather grip with red stitching. Spoon horn button included.
Included horn button is Blue / Yellow newer style. Some pictures may show the old style horn button. SRS bypass is not included (is the correct Spoon steering boss is purchased, SRS bypass will be included)ALL-78500-000-AExcl. Tax: €375.00 Incl. Tax: €450.00
Suitable for all S2000 AP1 & AP2
Fits all S2000 model years. FRP Construction. Widens front end by 20mm. Includes flare attachments for front bumper.
Finished in white and ready to paint.60200-AP1-000-BExcl. Tax: €729.17 Incl. Tax: €875.00
Like for Like replacement engine for the S2000 AP1
For the ultimate in endurance racing, we offer the Spoon Blueprinted Complete Engine Assembly. Each engine assembly is a JDM Honda long block straight from Spoon's engine assembly room. Spoon mechanics reassemble the engines with precision balances and blueprint each component down to 0.02g ensure optimum performance during endurance racing.
The engines are assembles in Spoon Type One workshop in Tokyo Japan. Each unit is assembled by hand under the close inspection of the highly experienced engineers. The engines are built to provide excellent performance, drivability and reliability.
During the build, you have the option of installing a range of Spoon performance upgrades which include Spoon Camshafts and a Spoon Baffled oil pan. These performance components are an additional cost to the engine build but there is no extra charge for fitting them.10000-F20-C00-DExcl. Tax: €11,529.17 Incl. Tax: €13,835.00
Suitiable for S2000 AP1 and AP2 models.
Fits all F20C and F22C engines
Direct replacement for existing sump pan
Comes with replacement gaskets and HAMP oil filter
In fast cornering it is possible for the engine so suffer low oil pressure due to oil starvation. This is caused by the lateral G forces pulling the oil away from the pickup.
The addition of the specially designed baffle plate to a genuine Honda sump makes it possible to prevent this occurrence. The Installation of a baffled oil pan is highly recommended when the vehicle is being used in a high G environment such as circuit racing / testing to prevent engine blow.
All Spoon Baffled Sumps include a replacement sum gasket and HAMP oil filter.11200-AP1-001-BExcl. Tax: €479.17 Incl. Tax: €575.00
Suitable for all S2000 AP1
The kit contains 0.25mm oversize pistons. The block will require boring and finishing to manufacture oversize specification.
The Spoon F20C Stroker has been designed to allow the standard Honda F20C be over stroked to the 2.2L capacity. Unleashing torque that some have complained the S2000 was missing in the past and increasing power.
The kit comprises of: Head gasket, crankshaft, connecting rods, forged pistons, rings, pins, oil jet. All parts are selected and balanced within .2g with a total rotational tolerance of less than 1g
Kit supplied with 0.25mm over bore pistons and rings
Higher compression will be achieved 11.8:1 (STD 11.7:1) Inner diameter × stroke (mm): 87.25 × 90.713000-F22-000-BExcl. Tax: €2,625.00 Incl. Tax: €3,150.00
For use with the Spoon S-Tai rear bumper (71501-AP1-000)
Can be retrofitted to other rear bumpers at the users choice.
Fits all S2000 model years. Carbon Fiber Construction. Designed to fit on the S-Tai Rear Bumper but will fit AP1 or AP2 rear bumpers with some modifications.
The Spoon rear diffuser smooth’s airflow underneath the rear bumper to reduce drag and produce downforce.71502-AP1-000-BExcl. Tax: €729.17 Incl. Tax: €875.00