BALANCED PROPSHAFT

BALANCED PROPSHAFT

BALANCED PROPSHAFT

Product No. 40100-AP2-001-D

Availability:

Excl. Tax: €1,295.83 Incl. Tax: €1,555.00

Shipping Information

Information on Stock Availability & Delivery


 

Stock item, next day delivery
Less than 5 stocked, next day delivery
Stock level usually 1, delivery could be delayed
Not a usual stock item, delivery time will vary.
Special Order Item, 4 to 6 Weeks Delivery.

 

Estimated stock and delivery time Only!

As we have multiple sales avenues we cannot guarantee product stock status. Any questions click the Chat button and someone will assist you.

Description

Details

The SPOON Propeller Shaft S2000 AP1 AP2 is a replacement Propeller Shaft for your honda from Spoon Sports. The engine, the clutch, the transmission, and the output power are connected with Diff through this propeller shaft. Spoon has put a lot of work in to this shaft to improve the rotation balance this part to 1.2kg/cm2 down from 1.3kg/cm2. Furthermore, the final rotation balance will ultimately also depend on your flywheel, brake rotor and so forth. Replacement propeller shaft, lighter weight, and balanced to perfection.

Vehicle Fitment

Suitable for S2000 AP2

Customer Images

Here you can upload a cool photo of your part installed on your car and view others peoples aswell.

Upload 3 images of your part installed for the chance to get a discount off you next order!

Ask a Question

Product Enquiry

Other Customer Also Viewed the Following Products, TAKE A LOOK

  • S-TAI CARBON AIR DUCT

    Product Overview

    The Spoon Engine Fresh Air Duct has been developed for use with the Spoon S-tai bonnet and front bumper. Woking in the same principle as the Spoon Carbon Air Duct, the ducting allows for cold air from a high pressure point on the front bumper to be fed directly in to the air box. The difference between this and the carbon air duct is it utilises the extra space made available by the S-tai bumper and bonnet to give an unrestricted flow of air to the all-important air box. 

    S-TAI CARBON AIR DUCT

    60100-AP1-S01-A
    Excl. Tax: €404.17 Incl. Tax: €485.00
  • CARBON BUCKET SEAT

    Product Overview

    This Spoon Sports Carbon Fibre Seat is not only a beautiful lightweight seat ideal for racing and the road.

    Unique cloth material was used which exhibits good moisture wicking while preventing the body from sliding. The bucket shape allows driver to withstand greater later-G loading with less effort. Shell has spine cut-out for increased comfort. Weighs 5.7 kg.

    Fits all car models with most side mount rails. Carbon Kevlar construction.

    .

    CARBON BUCKET SEAT

    ALL-81100-000-D
    Excl. Tax: €1,175.00 Incl. Tax: €1,410.00
  • F20C 2.2L STROKER KIT

    Product Overview

    The Spoon F20C Stroker has been designed to allow the standard Honda F20C be over stroked to the 2.2L capacity. Unleashing torque that some have complained the S2000 was missing in the past and increasing power.

    The kit comprises of: Head gasket, crankshaft, connecting rods, forged pistons, rings, pins, oil jet. All parts are selected and balanced within .2g with a total rotational tolerance of less than 1g

    Kit supplied with 0.25mm over bore pistons and rings

    Higher compression will be achieved 11.8:1 (STD 11.7:1) Inner diameter × stroke (mm): 87.25 × 90.7

    F20C 2.2L STROKER KIT

    13000-F22-000-B
    Excl. Tax: €2,625.00 Incl. Tax: €3,150.00
  • BLUPRINTED DRIVE SHAFT SET

    Product Overview

    The importance of a reliable driveshaft is often overlooked in endurance racing to street applications. The standard Honda units do not lack strength themselves, the troubles and failure of the driveshafts are often the finishing quality. Slight pitting can occur on the contact surfaces, which under high heat deteriorate which then cause vibrations and failure.

     

    The Spoon drive shafts are standard Honda units that have been disassembled then reworked and reassembled by Spoon technicians. Each contact surface has been polished and finished to exacting standards and then the components are matched during assembly to ensure the highest tolerances.

     

    This ensures a smooth power delivery and reliable service 

    BLUPRINTED DRIVE SHAFT SET

    42300-AP1-C00-D
    Excl. Tax: €1,650.00 Incl. Tax: €1,980.00
  • BLUEPRINTED F22C SHORT BLOCK [2.2L]

    Product Overview

    Spoon F20C Short Block assembled to the same exacting standards as the Spoon Blueprinted Engines. Available in three configurations: F20C [2L], F20C [2.2L] and F22C [2.2L].

    Spoon acquires these blocks from Honda Japan and disassembles them. Prior to reassembly, Spoon precision balances and blueprints these short blocks to ensure optimum performance during endurance racing. Blueprinted down to 0.02g and assembled to include a Spoon 2ply metal head gasket.

    This listing is for the F22C [2.2L] : Inner diameter × stroke (mm): 87.00 × 90.7 (2156cc) Compression ratio: 11.2 (STD 11.1)

    BLUEPRINTED F22C SHORT BLOCK [2.2L]

    10002-F22-000-D
    Excl. Tax: €6,470.83 Incl. Tax: €7,765.00
  • LIGHTWEIGHT WHEEL NUT, RED

    Product Overview

    Spoon Sports Lug Nuts are aluminium construction and Anodized Blue or Red. Ultra Lightweight and with a 60 Degree Taper.

     

    Notice:

    TAPERED lug nuts designed for use with aftermarket wheels. They are not to be used on OEM wheels. Please check which lug nut type your wheels use before installing.

    Weight: 21.13g each

    Thread: M12x1.5

    LIGHTWEIGHT WHEEL NUT, RED

    ALL-90304-001-A
    Excl. Tax: €6.67 Incl. Tax: €8.00

Upload images for this product

<