The Spoon clutch cover, or pressure plate increases clamping force by 30% with pedal feel almost unchanged and operation as smooth as OEM.
By increasing the contact pressure by a factor of 30%, considerable improvements in slipping, abnormal wearing, and shudder can be reduced - even in hard-driving situations.
- Vehicle Fitment
Suitable for all S2000 AP1 and AP2
Will fit all F20C & F22C engines
- Customer Images
Here you can upload a cool photo of your part installed on your car and view others peoples aswell.
Upload 3 images of your part installed for the chance to get a discount off you next order!
- Ask a Question
Other Customer Also Viewed the Following Products, TAKE A LOOK
Suitable for all S2000 AP1 and AP2
The importance of a reliable driveshaft is often overlooked in endurance racing to street applications. The standard Honda units do not lack strength themselves, the troubles and failure of the driveshafts are often the finishing quality. Slight pitting can occur on the contact surfaces, which under high heat deteriorate which then cause vibrations and failure.
The Spoon drive shafts are standard Honda units that have been disassembled then reworked and reassembled by Spoon technicians. Each contact surface has been polished and finished to exacting standards and then the components are matched during assembly to ensure the highest tolerances.
This ensures a smooth power delivery and reliable service42300-AP1-C00-DExcl. Tax: €1,650.00 Incl. Tax: €1,980.00
Suitable for all applications when installed with correct steering boss.
The SPOON Steering Wheel is made by the top notch steering wheel manufacturer MOMO. 340mm in diameter and featuring a strong extra thick grip, this steering wheel will give you maximum performance and feel.
Fits all Momo compatible steering hubs. Leather grip with red stitching. Spoon horn button included.
Included horn button is Blue / Yellow newer style. Some pictures may show the old style horn button. SRS bypass is not included (is the correct Spoon steering boss is purchased, SRS bypass will be included)ALL-78500-000-AExcl. Tax: €375.00 Incl. Tax: €450.00
Suitable for S2000 AP1 & AP2
Utalises the OEM S2000 rotor
Caliper wheel clearance may be an issue - dependant on wheel. OEM wheels may require up to 15mm spacer to provide adiwuate clearance
S2000 profile brake pad required.
The Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads and controlling future costs. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.
The 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction greatly reduces un-sprung weight. These benefits are achieved while maintaining a stock feel for daily driving.
Spoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. When the S2000 was released, Spoon designed the mono-block caliper with a one piece construction and greatly improved rigidity. This has now been made available for most models of Honda.
The Monoblock caliper utilizes and standard S2000 Pad profile and 300mm Disc. Due to the there is a wide range of compound options at affordable prices. We do however recommend the installation of Spoon Pads and Cross Drills Discs.
PLEASE NOTE: This caliper kit is for use with the AP1 and AP2. The calipers utilise a standard pad and disc.45020-MBR-G00-BExcl. Tax: €1,245.83 Incl. Tax: €1,495.00