The Spoon 4-2-1 header is designed to provide the maximum balance between peak power and torque.
To develop this header, Spoon tested all possible combinations of pipe diameter, length, bends, and rotation through engine dyno, flow bench, and driving/circuit tests. The result was an extremely lightweight header (5.2kg) with substantial peak and mid-range power gains. Weight saving 50% over the OEM manifold of 10.2kg
For best results we recommend installing the with Spoon N1 Muffler kit.
Notice: Unlike many of the Spoon Sports exhaust products. This does not have a the Spoon Sports badge installed.
- Vehicle Fitment
Suitable for all S2000 AP1 and AP2
Direct replacement for existing manifold
Comes with gaskets, nuts and bolts as required for installation.
- Customer Images
Here you can upload a cool photo of your part installed on your car and view others peoples aswell.
Upload 3 images of your part installed for the chance to get a discount off you next order!
- Ask a Question
Other Customer Also Viewed the Following Products, TAKE A LOOK
For use with the Spoon AERO rear bumper (71501-AP1-001)
Can be retrofitted to other rear bumpers at the users choice.
Additional carbon fiber diffuser for fitment to the new Aero Bumper.
Developed to further channel air from unearth the car to improve airflow and downforce.
Material – Carbon fiber71502-AP1-001-BExcl. Tax: €683.33 Incl. Tax: €820.00
Suitable for most aftermarket radiators
The Spoon Sports radiator cap functions to increase the pressure inside the radiator; the laws of physics then apply accordingly, even when the temperature of the coolant water exceeds 100Â°C, boiling can be avoided so gas bubbles and subsequent hot spots are avoided and increased cooling performance may be achieved.
STD 1.1 increased to 1.35kgf/cm2
Type D is suitable for most factory radiators
Type F is suitable for most aftermarket radiatorsALL-19045-001-AExcl. Tax: €28.33 Incl. Tax: €34.00
Suitable for S2000 AP1, S2000 AP2
Comes will all fixtures and fittings for installation.
Spoon Sports Carbon Fiber GT 3D Wing has been developed and honed under endurance racing conditions to develops a significant amount of downforce to increase rear end stability and grip.
Width is 1500mm and stands are 300mm +/- 10mm
Come with all bolts and brackets needed for installation.84112-AP1-000-BExcl. Tax: €1,437.50 Incl. Tax: €1,725.00
Suitable for all S2000 AP1
The kit contains 0.25mm oversize pistons. The block will require boring and finishing to manufacture oversize specification.
The Spoon F20C Stroker has been designed to allow the standard Honda F20C be over stroked to the 2.2L capacity. Unleashing torque that some have complained the S2000 was missing in the past and increasing power.
The kit comprises of: Head gasket, crankshaft, connecting rods, forged pistons, rings, pins, oil jet. All parts are selected and balanced within .2g with a total rotational tolerance of less than 1g
Kit supplied with 0.25mm over bore pistons and rings
Higher compression will be achieved 11.8:1 (STD 11.7:1) Inner diameter × stroke (mm): 87.25 × 90.713000-F22-000-BExcl. Tax: €2,625.00 Incl. Tax: €3,150.00
Suitable for all S2000 AP1 & AP2
Spoon Aero Mirrors attach to the factory location with no modifications necessary. Mirrors feature a wide angle view with a blue anti-glare tint. Folding function is spring loaded with clicks similar to the OEM mirror. Lens angle are adjusted manually.
Constructed in lightweight FRP and finished in a black ready for painting.76100-AP1-000-DExcl. Tax: €562.50 Incl. Tax: €675.00