VENTURI BIG THROTTLE BODY

VENTURI BIG THROTTLE BODY

VENTURI BIG THROTTLE BODY

Product No. 16400-ZF1-020-D

Availability:

Excl. Tax: €920.83 Incl. Tax: €1,105.00

Shipping Information

Information on Stock Availability & Delivery


 

Stock item, next day delivery
Less than 5 stocked, next day delivery
Stock level usually 1, delivery could be delayed
Not a usual stock item, delivery time will vary.
Special Order Item, 4 to 6 Weeks Delivery.

 

Estimated stock and delivery time Only!

As we have multiple sales avenues we cannot guarantee product stock status. Any questions click the Chat button and someone will assist you.

Description

Details

The Spoon throttle body is a reworked, brand new OEM Honda unit that has been taper bored and fitted with a large diameter butterfly.  

The diamond cutting method used results in a mirror like surface finish internally which reduces resistance. During the cutting process the geometry of the body is changed to benefit from the venuri effect.

Engine and throttle response are improved, as is mid and upper rpm power. A 4-6hp improvement can be expected in the mid-rpm range.

The Spoon throttle body is a complete replacement unit and includes all necessary sensors.

To make the most of the venture effect and the increased air flow it is recommended that the inlet to the intake manifold is also enlarged. Potentially this will dramatically improve the potential horse power gains. Should you require this work to be carried out, please contact us as we can arrange for it to be done in our Race Engineering Workshop

Remarks:

60 mm (STD 54mm): butterfly diameter: 56mm (STD 50mm) diameter to inlet gasket

Vehicle Fitment

Suitable for CR-Z ZF1

Comes with replacementment gasket.

Customer Images

Here you can upload a cool photo of your part installed on your car and view others peoples aswell.

Upload 3 images of your part installed for the chance to get a discount off you next order!

Ask a Question

Product Enquiry

Other Customer Also Viewed the Following Products, TAKE A LOOK

  • MONOBLOCK CALIPER SET

    Product Overview

    The Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads and controlling future costs. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.

     

    The 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction greatly reduces un-sprung weight. These benefits are achieved while maintaining a stock feel for daily driving.

     

    Spoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. When the S2000 was released, Spoon designed the mono-block caliper with a one piece construction and greatly improved rigidity. This has now been made available for most models of Honda.

     

    PLEASE NOTE: This caliper kit is for use with the CL7, DC2 EK9, CR-Z. For installation you will also require a pair of 300mm discs, these can also be supplied: Part number 45251-5H11416

    MONOBLOCK CALIPER SET

    45020-MBF-G01-B
    Excl. Tax: €1,245.83 Incl. Tax: €1,495.00
  • RADIATOR CAP, TYPE F

    Product Overview

    The Spoon Sports radiator cap functions to increase the pressure inside the radiator; the laws of physics then apply accordingly, even when the temperature of the coolant water exceeds 100°C, boiling can be avoided so gas bubbles and subsequent hot spots are avoided and increased cooling performance may be achieved.

     

    Notice:

    STD 1.1 increased to 1.35kgf/cm2

    Type D is suitable for most factory radiators

    Type F is suitable for most aftermarket radiators

    RADIATOR CAP, TYPE F

    ALL-19045-001-A
    Excl. Tax: €28.33 Incl. Tax: €34.00
  • CARBON BUCKET SEAT

    Product Overview

    This Spoon Sports Carbon Fibre Seat is not only a beautiful lightweight seat ideal for racing and the road.

    Unique cloth material was used which exhibits good moisture wicking while preventing the body from sliding. The bucket shape allows driver to withstand greater later-G loading with less effort. Shell has spine cut-out for increased comfort. Weighs 5.7 kg.

    Fits all car models with most side mount rails. Carbon Kevlar construction.

    .

    CARBON BUCKET SEAT

    ALL-81100-000-D
    Excl. Tax: €1,175.00 Incl. Tax: €1,410.00

Upload images for this product

<