The Spoon throttle body is a reworked, brand new OEM Honda unit that has been taper bored and fitted with a large diameter butterfly.
The diamond cutting method used results in a mirror like surface finish internally which reduces resistance. During the cutting process the geometry of the body is changed to benefit from the venuri effect.
Engine and throttle response are improved, as is mid and upper rpm power. A 4-6hp improvement can be expected in the mid-rpm range.
The Spoon throttle body is a complete replacement unit and includes all necessary sensors.
To make the most of the venture effect and the increased air flow it is recommended that the inlet to the intake manifold is also enlarged. Potentially this will dramatically improve the potential horse power gains. Should you require this work to be carried out, please contact us as we can arrange for it to be done in our Race Engineering Workshop
Diameter: 70mm (FD2 67mm / FN2 65mm) butterfly size.
Installation of the FD2 Throttle body can take place on the FN2 Civic Type R. This will give great improvements over the Standard restrictive 65m Throttle body. However there will be a large step between the throttle body and intake manifold which will not inhibit the benefit of the modification. We can offer on an exchange basis a reworked intake manifold, ported and polished to match the enlarged Spoon throttle body, please contact us if you are interested.
- Vehicle Fitment
Suitable for Civic FD2 Type R and Civic FN2 Type R
Comes with replacementment gasket.
If being installed to the Civic FN2 Type R you will require the Spoon modified intake chamber sku 17100-FN2-021
- Customer Images
Here you can upload a cool photo of your part installed on your car and view others peoples aswell.
Upload 3 images of your part installed for the chance to get a discount off you next order!
- Ask a Question
Other Customer Also Viewed the Following Products, TAKE A LOOK
Suitable for all applications
The Spoon Magnetic Drain Bolt Set uses a magnetic bolt to capture any metallic fragments in your engine away from the delicate engine internals. The magnetic drain set is performance for ensuring the protection of your high performance engine and gearbox
Set replaces engine and gearbox oil drain bolts. Also available separatelyALL-90009-000-BExcl. Tax: €33.33 Incl. Tax: €40.00
Suitable for most aftermarket radiators
The Spoon Sports radiator cap functions to increase the pressure inside the radiator; the laws of physics then apply accordingly, even when the temperature of the coolant water exceeds 100Â°C, boiling can be avoided so gas bubbles and subsequent hot spots are avoided and increased cooling performance may be achieved.
STD 1.1 increased to 1.35kgf/cm2
Type D is suitable for most factory radiators
Type F is suitable for most aftermarket radiatorsALL-19045-001-AExcl. Tax: €28.33 Incl. Tax: €34.00
Suitable for Civic EP3 Type R, Civic FD2 Type R, Civic FN2 Type R, Integra DC5 Type R, Accord Euro R
Comes with bearings required for installation
The differential is a mechanical device that allows a flexible division of drive between the wheels allowing the car to corner. Load applied to the drive wheels during acceleration and cornering is always different from left to right wheel. Due to this wheel spin can occur causing loss of control and acceleration performance.
The Spoon LSD is a device which automatically reduces the loss of drive which can result from wheel spin on one side of the axle. In turn this conveys power and torque through the wheel with the most grip helping the wheel accelerate the car. In other words it is a necessity for all sport and race driving.
The Spoon LSD is of Mechanical Type 1.5 way to front wheel drive applications and 1.75 way for rear wheels drive applications. Initial torque has been set at 9-9.5 KG (cold). As a characteristic of the mechanical LSD there is some dragging of the internal gear that can be felt in low speed cornering and clicking sound that can be heard.41000-DC5-000-BExcl. Tax: €954.17 Incl. Tax: €1,145.00
Suitable for Civic FN2 Type R
Comes with gaskets, nuts and bolts as required for installation.
The SPOON Muffler Kit Civic Type-R Euro FN2 was carefully developed to provide the best balance of power, weight, and sound.
Digital measurement of exhaust gas pressure and flow volume, engine dyno testing and circuit testing were used extensively. Testing showed that placing the resonator close to the engine provided the best sound reduction and weight balance. Consequently, the exhaust not only provides power, but also reduces exhaust weight and shifts the exhaust weight balance towards the centre of the car to help improve the cars handling.
Material: Stainless Steel (SUS304)
Pipe Diameter at Cat(mm): 65
Pipe Diameter to tip (mm): 60.5
Pipe Thickness (mm): 1.218000-FN2-000-DExcl. Tax: €1,020.83 Incl. Tax: €1,225.00
Suitable for Civic EK9 Type R, Civic FN2 Type R, CR-Z ZF1 and ZF2, Integra DC2 Type R, Integra DB8 Type R
All applications above require the 300x26mm conversion disc 45251-5H11416
S2000 profile brake pad required.
The Spoon 4-pot caliper has been specifically designed and tested for Honda applications. Unlike other 4-pot calipers, Spoon calipers are direct fit and are designed to work with the stock brake system, including the ABS. Spoon calipers use stock Honda size brake pads, which gives users incredible flexibility in choosing pads and controlling future costs. The 4-pot calipers significantly improve both high speed braking and brake pedal feel and its consistency during track use.
The 4-pot design also makes pad wear more even and minimizes rotor warpage. The aluminium construction greatly reduces un-sprung weight. These benefits are achieved while maintaining a stock feel for daily driving.
Spoon calipers are manufactured by Nissin, the OE supplier of all Honda brakes. When the S2000 was released, Spoon designed the mono-block caliper with a one piece construction and greatly improved rigidity. This has now been made available for most models of Honda.
PLEASE NOTE: This caliper kit is for use with the CL7, DC2 EK9, CR-Z. For installation you will also require a pair of 300mm discs, these can also be supplied: Part number 45251-5H1141645020-MBF-G01-BExcl. Tax: €1,245.83 Incl. Tax: €1,495.00