The Spoon throttle body is a reworked, brand new OEM Honda unit that has been taper bored and fitted with a large diameter butterfly.
The diamond cutting method used results in a mirror like surface finish internally which reduces resistance. During the cutting process the geometry of the body is changed to benefit from the venuri effect.
Engine and throttle response are improved, as is mid and upper rpm power. A 4-6hp improvement can be expected in the mid-rpm range.
The Spoon throttle body is a complete replacement unit and includes all necessary sensors.
To make the most of the venture effect and the increased air flow it is recommended that the inlet to the intake manifold is also enlarged. Potentially this will dramatically improve the potential horse power gains. Should you require this work to be carried out, please contact us as we can arrange for it to be done in our Race Engineering Workshop
Chassis number: AP1-100
65 mm (STD 62mm): diameter: 70mm (STD 67mm) diameter butterfly
- Vehicle Fitment
Suitable for S2000 AP1 MY04 - MY09 and all AP2
Fits all facelift AP1 and all AP2 S2000 - Vehicles with DBW throttle body.
Comes with replacementment gasket.
- Customer Images
Here you can upload a cool photo of your part installed on your car and view others peoples aswell.
Upload 3 images of your part installed for the chance to get a discount off you next order!
- Ask a Question
Other Customer Also Viewed the Following Products, TAKE A LOOK
For use with the Spoon S-Tai front bumper
Un restricted air duct to air box.
The Spoon Engine Fresh Air Duct has been developed for use with the Spoon S-tai bonnet and front bumper. Woking in the same principle as the Spoon Carbon Air Duct, the ducting allows for cold air from a high pressure point on the front bumper to be fed directly in to the air box. The difference between this and the carbon air duct is it utilises the extra space made available by the S-tai bumper and bonnet to give an unrestricted flow of air to the all-important air box.60100-AP1-S01-AExcl. Tax: €404.17 Incl. Tax: €485.00
Suitable for S2000 AP1, S2000 AP2, Civic EK9 Type R, Civic EP3 Type R, Civic FD2 Type R, CR-Z ZF-1, CR-Z ZF2, Accord CL7 Euro R
Spoon brake pads feature high resistance to fading, excellent performance at low temperatures, near stock life expectancy, and low rotor wear. These properties are achieved through a combination of pad material and unique backing metal design.
Spoon brake pads provide strong braking power while maintaining stable, consistent, and direct driving feel. This allows drivers to enter corners smoothly. The operating range is 50 - 700C, while the optimum rotor temperature is between 200 - 300C.43022-EK9-000-AExcl. Tax: €208.33 Incl. Tax: €250.00
Suitable for all S2000 AP1 & AP2
Fits all S2000 model years. FRP Construction. Widens front end by 20mm. Includes flare attachments for front bumper.
Finished in white and ready to paint.60200-AP1-000-BExcl. Tax: €729.17 Incl. Tax: €875.00
Suitable for all S2000 AP1
The kit contains 0.25mm oversize pistons. The block will require boring and finishing to manufacture oversize specification.
The Spoon F20C Stroker has been designed to allow the standard Honda F20C be over stroked to the 2.2L capacity. Unleashing torque that some have complained the S2000 was missing in the past and increasing power.
The kit comprises of: Head gasket, crankshaft, connecting rods, forged pistons, rings, pins, oil jet. All parts are selected and balanced within .2g with a total rotational tolerance of less than 1g
Kit supplied with 0.25mm over bore pistons and rings
Higher compression will be achieved 11.8:1 (STD 11.7:1) Inner diameter × stroke (mm): 87.25 × 90.713000-F22-000-BExcl. Tax: €2,625.00 Incl. Tax: €3,150.00
Like for Like replacement engine for the S2000 AP1
For the ultimate in endurance racing, we offer the Spoon Blueprinted Complete Engine Assembly. Each engine assembly is a JDM Honda long block straight from Spoon's engine assembly room. Spoon mechanics reassemble the engines with precision balances and blueprint each component down to 0.02g ensure optimum performance during endurance racing.
The engines are assembles in Spoon Type One workshop in Tokyo Japan. Each unit is assembled by hand under the close inspection of the highly experienced engineers. The engines are built to provide excellent performance, drivability and reliability.
During the build, you have the option of installing a range of Spoon performance upgrades which include Spoon Camshafts and a Spoon Baffled oil pan. These performance components are an additional cost to the engine build but there is no extra charge for fitting them.10000-F20-C00-DExcl. Tax: €11,529.17 Incl. Tax: €13,835.00
Suitable for all 99+ AP1 2.0
Comes with all washers and bolts required to install
Spoon Sports Brake Hoses feature a No. 3 Teflon tube with a low expansion ratio in combination with a covering stainless-steel mesh, and through its implementation, it is possible to achieve braking which feels more direct and responsive.01460-AP1-000-CExcl. Tax: €329.17 Incl. Tax: €395.00