Spoon Performance Camshaft kit for CRZ ZF1
The CRZ Vtec system works in a slightly different way compared to the conventional system that most Honda Enthusiasts are used to. The CRZ utilises a camshaft with a single lobe that engages two inlet valves per cylinder when Vtec is engaged at higher RPMS. At low RPM the camshaft only operates one valve to give better economy and allow for the electric motor to assist.
The Spoon camshaft kit utilises parts from the GE8 Honda Jazz that permanently engage both valves giving vast improvement in torque and power in the lower RPM’s. Additional the re-profiled camshaft with higher lift and duration lobes give a marked improvement in power and torque through the higher RPM’s
- Vehicle Fitment
CRZ ZF1 - The vehicle will require an ECU remap - This is not available from Spoon but can be supplied if required.
- Customer Images
Here you can upload a cool photo of your part installed on your car and view others peoples aswell.
Upload 3 images of your part installed for the chance to get a discount off you next order!
- Ask a Question
Other Customer Also Viewed the Following Products, TAKE A LOOK
Suitable for CR-Z ZF1
Comes with replacementment gasket.
The Spoon throttle body is a reworked, brand new OEM Honda unit that has been taper bored and fitted with a large diameter butterfly.
The diamond cutting method used results in a mirror like surface finish internally which reduces resistance. During the cutting process the geometry of the body is changed to benefit from the venuri effect.
Engine and throttle response are improved, as is mid and upper rpm power. A 4-6hp improvement can be expected in the mid-rpm range.
The Spoon throttle body is a complete replacement unit and includes all necessary sensors.
To make the most of the venture effect and the increased air flow it is recommended that the inlet to the intake manifold is also enlarged. Potentially this will dramatically improve the potential horse power gains. Should you require this work to be carried out, please contact us as we can arrange for it to be done in our Race Engineering Workshop
60 mm (STD 54mm): butterfly diameter: 56mm (STD 50mm) diameter to inlet gasket16400-ZF1-020-DExcl. Tax: €920.83 Incl. Tax: €1,105.00
Suitable for all applications when installed with correct steering boss.
The SPOON Steering Wheel is made by the top notch steering wheel manufacturer MOMO. 340mm in diameter and featuring a strong extra thick grip, this steering wheel will give you maximum performance and feel.
Fits all Momo compatible steering hubs. Leather grip with red stitching. Spoon horn button included.
Included horn button is Blue / Yellow newer style. Some pictures may show the old style horn button. SRS bypass is not included (is the correct Spoon steering boss is purchased, SRS bypass will be included)ALL-78500-000-AExcl. Tax: €375.00 Incl. Tax: €450.00